The degree of marble damage determines the renovation process
Publish Time:2020-10-12 Click rate:487
The degree of marble damage determines the renovation process
Many decoration projects in life will have mixed work types. A large number of construction workers will wear or corrode the appearance of the marble when moving materials. In severe cases, large areas of marble will be stained, which will affect the original gloss. Some people choose to re-pave the stone, some choose to refurbish, which one is better? The above phenomenon occurs, we only need to carry out a relatively simple renovation and polishing, and we will get a new effect, which is more economical than re-paving the stone. Affordable. So how do we refurbish the marble?
First of all, we have to determine the degree of damage to the marble, and determine the renovation process according to different degrees of damage. According to the corresponding renovation process, there are three types of marble renovation: light renovation, medium renovation and deep renovation.
1. Marble light refurbishment: When the stone surface is slightly scratched, we can use 800# diamond water polishing pad + clean water for 10 minutes, and light refurbishment process can be used for refurbishment. Note: If there is old wax on the ground, wax up first, add water during the polishing process to keep the ground moist, and use a water suction machine to suck up the sewage to prevent the sewage from polluting the ground again. Then change to 1500#.3000#PAOG polishing sheet and diamond water-grinding sheet, and use the above method to polish one by one.
2. The marble is moderately refurbished, and the surface of the stone loses its luster. It can be refurbished by moderate refurbishment. Use 200#, 400#, 800#, 1500#, 3000# polishing sheet, which can not reflect the object at all but does not have deep scratches . The diamond water-grinding discs are polished one by one, the polishing method, and the matters needing attention are as described above.
3. Marble deep renovation. When the stone shows holes, weathering, and severe corrosion, the deep renovation process can be used. Before refurbishment, it is completely tarnished and has deep scratches. First, the holes should be repaired. The method is as follows: first clean the dirt in the holes, and then dry the stone. According to the original stone color and reflective characteristics, use epoxy resin Resin or unsaturated resin glue, after toning, repair, use weighting machine, equipped with refurbished plate and 50#, 150#, 200#, 400#, 800#, 1500#, 3000# polished diamond water mill The pieces are polished one by one. Note that the item is the same as "marble light renovation".
Related Links
How to deal with marble cracking?
How to clean and maintain marble furniture?
