How to deal with marble cracking?
Publish Time:2020-10-10 Click rate:494
How to deal with marble cracking?
As the most common material in home decoration, everyone is familiar with it. But how much do you know about it? How to deal with common cracking conditions?
The first step: damage repair; first, fill the original damaged surface of the stone with marble glue close to the color of the stone. Then use a special stone slitting machine to neatly cut and slit the center seam of the original stone installation, so that the width of the gap becomes similar, and then fill it with marble glue close to the color of the stone. (Note: If the center seam has been done before, there is no need to re-sew)
The second step: Grind the cut position; use a granite refurbishing machine with a special cut-cut grinding sheet to carefully polish the cut-cut position to make it a flat surface with the stone.
The third step: Polishing; use a special granite polishing machine to grind the stone from coarse to fine stone from the 50-3000 size to make the ground bright and smooth as new.
The fourth step: crystallization; use marble crystal powder and crystal medicament with stone refurbishment machine polishing, under the pressure of grinding, the stone and crystal powder will undergo a comprehensive physical and chemical reaction under the action of high temperature to form a dense and hard crystal protective layer . After crystallization, it can enhance the color and brightness, and can also achieve anti-skid, waterproof, oil-proof and other effects.
