Selection standards and construction methods of ground quartz stone plates

Selection standards and construction methods of ground quartz stone plates

Selection of ground quartz stone plates:

How to solve the problems existing in the laying of quartz stone slabs on the ground?

The thickness of the common quartz stone slabs for all of us is 15mm, and the thickness requirement for ground use is more than 20mm. Generally, manufacturers do not have too much inventory of this thickness, so you should explain the use before buying. The production process and formula are also different. The content of quartz sand for qualified quartz stone slabs is more than 90% and 90%, while the content of quartz sand for floor paving slabs must be higher than 93%, and the resin formula needs to be adjusted.

Construction method of ground quartz stone slab:

When it comes to laying the ground, everyone's first impression should be to use cement as the adhesive, but it has no effect on the quartz stone slab. Note for laying of quartz stone floor tiles: The ground is required to be flat and smooth, and special glue for quartz stone plates should be used for pasting. A 3-5mm expansion joint should be reserved between the two pieces to prevent warping due to thermal expansion and contraction.