How to maintain the gloss of stone?
Publish Time:2020-09-10 Click rate:418
How to maintain the gloss of stone?
1. Marble minor renovation
The surface of the stone is slightly scratched, and it can be refurbished with a light refurbishment process. If there is old wax on the ground, wax it first, and then use 800# diamond water milling sheet plus clean water to polish for ten minutes. Note: add water during the polishing process to keep the ground moist, and use a water suction machine to absorb sewage to prevent sewage. Pollution of the ground.
Change 1500#, 3000# polishing sheet, diamond water polishing sheet, and polish them one by one with the above method. After all the renovation procedures are completed, wash with clean water and absorb the water on the stone surface, and the marble light renovation work is completed.
2. Moderate renovation of marble
When the surface of the stone loses its luster and cannot reflect the object at all but does not have deep scratches, it can be refurbished with a moderate refurbishment process.
Use 200#, 400#, 800#, 1500#, 3000 # polishing pads and diamond water polishing pads to polish one by one. The polishing method and precautions are consistent with the above.
3. Deep renovation of marble
When the stone surface has holes, weathering, severe corrosion, complete loss of luster and deep scratches, the deep renovation process can be used for renovation treatment.
Before renovation, the holes must be repaired. The method is as follows: first clean the dirt in the hole, and then dry the stone. According to the color and reflective characteristics of the original stone, use imported epoxy resin or unsaturated resin glue. Repair after color mixing, use weighting machine, equipped with refurbished discs and 50#, 150#, 200 #, 400#, 800#, 1500#, 3000# polished diamond water abrasive pads for polishing one by one.
The polishing method and precautions are the same as those for light renovation. If you use marble crystal hard powder for stone crystal hardening treatment, in the refurbishment process, after being ground by the 800# diamond water mill, you can directly use marble crystal hard powder for crystal hardening treatment, and the treated stone surface is as bright as new.
