Causes of stone floor damage
Publish Time:2020-09-07 Click rate:437
Causes of stone floor damage
1. The settlement and tearing of the foundation part of the ground causes the stone on the surface to crack.
2. External damage caused damage to the ground stone.
3. Choosing to lay the floor with marble from the stone holding will leave a problem.
4. Humid environment.
5. Wrong protection methods.
6. Abrasion destroys the gloss of the marble on the surface.
Countermeasures to prevent damage to the stone floor
1. In the analysis of the above reasons for the damage of the stone floor, we can see that in addition to trying not to choose loose marble on the surface, water is a major cause of stone damage.
2. To solve the problem of water, everyone knows that the stone must be painted with a protective agent, but this method is not completely effective and once and for all.
We have done some tests, and the humidity of the stone that has problems on the ground is mostly above 5%. If the stone always maintains such a humidity, even if the cracks and holes are repaired, new ones will appear in other parts after a long time. problem. In this way, the problem of eliminating water sources arises.
Confirm the stone floor restoration method
1. On-site observation. Before repairing the problematic stone floor, go to the site to observe, fully grasp the damage and condition of the stone, analyze and find the source of the problem, and at the same time pay attention to the surrounding business environment, and discuss the restoration with the owner. The arrangement of homework time. This is conducive to submitting a fully complete and feasible stone restoration report for the owner to confirm.
2. After determining the restoration plan of the stone surface, you should negotiate with the owner to find an inconspicuous location and try to build a piece of ground. In this way, one side will test the feasibility of the plan, and on the other hand, let the owner confirm the repair effect and avoid some unnecessary disputes. It is best to observe the ground for a period of time. During this period, pay attention to the changes in the humidity of the stone, and observe whether the repaired part has peeling and reappearing damage, so that the repair plan can be revised accordingly.
stone restoration
1. Repair the defect surface
2. Repair the hole surface
3. Repair stitching
4. Repair cracks
Related Links:
New Arabescato Venato / Castro White Marble
