marble tile | How to use marble grout
Publish Time:2020-08-26 Click rate:483
marble tile | How to use marble grout
【How to use marble grout】
After the marble is laid, it still needs to be treated with a caulking agent. Because marble is more expensive, many construction workers are afraid to caulk the marble for fear of ruining the effect of the marble. So, how should the marble caulk be used?
1. Wet the base surface of the wall with clean water first, and use it as an adhesive when there is no water on the surface.
2. After the marble is pasted within the specified time, slightly twist and rub the marble up and down when pasting, or tap it with a mallet to make the marble and the adhesive adhere closely.
3. Correct the joints between the level and the adjacent plates. Note that 2mm or more joints should be reserved between the marbles.
4. Preliminarily clean the dirt attached to the surface of the board. After the marble has been pasted, it can be cleaned and caulked for 3 days. When caulking, you should use a special filler for artificial marble.
5. After caulking, clean the caulking material and dirt attached to the surface of the board in time.
6. After the marble is laid, the protective film can be torn off after acceptance and cleaning.
7. It is recommended not to use traditional marble wet hanging construction.
Related Links:
